What's the oldest piece of tech you still have running?

Me. 62 years. As long as it keeps on ticking, I'm proud.

Seriously? No upgrades, augments, removals or additions?
I'm 45 and I don't think my knees or hips will last that long. And my memory will probably degrade over the next twenty years.
You go girl!

I've got a Miele washing machine that's the best part of 40 years old. It's required some maintenance over the years. However, it was designed with maintenance in mind, so all the repairs have been fairly painless.

My 5 year old dishwasher, on the other hand, has cost me more time, money and stress than the (very overworked) washing machine.

Miele shit just continues to exist inexplicably. Literally unbreakable (permanently). And according to what I've read, at least, their modern stuff has not dropped in quality
I honestly can't think of any brands that have anything close to that longevity
- It's the little things that count.
  The drain pump is just 3 bolts to take off (pump came back to life after I tipped it. The new one is still sat in the cupboard a decade later).
  The electronics are mounted on their own door. They swing out, and are VERY easy to service.
  The wiring diagram was in a plastic wallet inside the machine.
  The shocks are easy to access and come off with an M10 spanner and are easy access.
  Those are just the ones that have noticed explicitly, the whole machine was built with that mentality.
- I used a Miele hoover as a shop vac, hoovering wall plaster, muck and sawdust etc and pretty much abused it - replaced all filters and gave it a good clean and it still works like new. That was 5 years ago and it's still going fine.
IMHO, if a dishwasher isn’t under warranty, and it’s a mechanical or electrical issue, you might just want to replace it. The cost of technician and parts can add up, and a new machine with a good reviews is only around $500 usd.
- It's a bit crappy that manufacturers have managed to essentially force us into a subscription for our home appliances, by making self repair uneconomical and expensive, almost guaranteeing a replacement every 4-5 years.
  The repair contract on my washing machine is about to run out, and that thing has been serviced many times at this point. Once for a blown mainboard, burnt out motor, and other miscellaneous issues that some of the techs haven't been able to identify, having to return again with more bits.
  At least I have a spare mainboard now and the last tech fitted a brand new motor, which is way quieter than the horrifically loud original one
- It's fixed now. It was a 10p sensor embedded in a £65 piece of plastic. The error message had me barking up the wrong tree. It's fixed now, at least.
  I dislike being wasteful. When my last TV died, while I replaced it, I then fixed it, and gave it to a friend. £10 backlight, and an hour or so of effort.
- Why? Mine went error 17, that's water in the bottom, turns out the seals had become damaged over the years. 1€ replacement part, 25 Minutes of time and a YouTube video and the thing has been running for 3 years as of now, again (total age 12 years).

My original NES and game cartridges. Still work great, although retired as collectibles in favor of emulators now.

I got lucky with mine. I started having issues with mine around 2000. I lived in Washington, only like an hour from Nintendo of America. At the time, Nintendo still serviced all their old consoles up to and including their current consoles. (This would change in 2006, with the Wii, when they started releasing old games digitally, it was game-over for their long-term servicing of old consoles.) So I took mine in, and if I recall correctly, it was about $50 to get all my games professionally cleaned and for the console to be cleaned, fixed, and sent home with new power supply and controllers.
It's been a champ ever since.
- I wish I had known about that. The cleaning accessories I’ve found over the years have kept it going without issues, but I definitely would have sent mine in for a preventative professional cleaning and refurbishing if they found anything wrong with it.
Neat.
I have a hand-me-down NES from a relative that sadly passed away, console works a treat but at some point within the past decade the cartridge batteries went flat. Finally have the gamebit driver to replace them but the gear is all packed away at the back of my storage cupboard...
- Could always do the melted pen trick (outside; burning plastic is not good for you). Could risk melting the game cart plastic, though if you get the pen too hot.
Same here. It's been a while since I've owned an actual TV to hook them up to though.

A pocketwatch manufactured in 1889. I keep it running as a memento mori: the watch may outlive the watchmaker. Build things well -- they may be all people remember you by, one day.

I also have a slide rule at my desk at most times, to remind me of false-precision.

I guess the oldest though, is a Wu Zhu coin from the Three Kingdoms period (currency is a technology, too?). I keep it to remember that all empires arise from chaos, and must return to it; that all assets eventually have no value. That the things that endure, are stranger currencies still.

You're the badass stoich character from fantasy stories!
"I keep the relics of my ancestors to remind me we all die"
- Certainly, no one would accuse me of insufficient gravitas.
A pocketwatch manufactured in 1889. I keep it running as a memento mori:
And to think I almost typed in my Lumia 1020... 🤣 🤣 Hats off mate!
- If you happen to want one, they are surprisingly affordable (I think I paid ~100$). So many were made, for so many years, that they are not exactly rare! Some antiques are fun like that.

A 1940s era Sterling Siren Model "F" factory siren. This siren spent decades outside of a Long Island, NY firehouse, acting as a street clearing siren to allow fire engines to exit the station unimpeded during an emergency. It was decommissioned a few years ago and popped up on eBay, and I was able to get ahold of it for cheap as the seller didn't know its worth. Model F sirens are very hard to find, as they haven't been made since the 1960s, and the need for street clearing and fire sirens have lessened with the advent of pagers. I believe there are less than a dozen left in service across North America.

Mine is in very good running shape, despite its age. I lubricated the bearings recently (brass sleeve bearings) and let the motor break in. It isn't quite as loud as my Federal Sign & Signal Model "L" (built in the 1960s) but still packs a punch. I usually set them off with the city sirens every Monday. It does need cosmetic restoration, as the paint is badly weathered and the projector has some dents in it, but it won't be hard to fix up.

https://youtu.be/KvsGiL15g1k?si=ZgheNIH-fqOHJXnJ

My Model L is on the left, and my Model F is on the right.

Your neighbors must love you.
- They've never complained, and I'm respectful with them. So I think them and I are cool lol
Your city has sirens that go off every Monday?
- Yup! A weekly 30 second test.
- That was common in the town where I grew up. The sirens were used as tornado warnings, so they made sure they were in good working order.
- It's relatively common in small towns. Some towns with volunteer fire departments will have a siren they use both to call all available volunteer firefighters and to announce the need to shelter for a tornado. They used to sound it at noon every day and my wife (then girlfriend) used it as an alarm clock when she worked 2nd shift anytime she slept in too late
  About 5 years ago they stopped sounding it at noon, and honestly I'm not sure when the last time i heard the sirens was since tornadic storms are becomes much less common here and the firefighters have become increasingly reliant on their radios instead. I kinda miss it. There's a quaintness to just listening for the noon whistle to tell time
But why do you have sirens?
- Because it's a hobby of mine, has been for years.

My paternal grandmother's KitchenAid model K mixer she bought just after my grandfather returned from WW2. She gave it to my mother in the late 70's because she wanted a new one and the damn thing showed no signs of dying. My mother gave it to my wife about 15 years ago for the same reason.

We've bought some new accessories but that fucking zombie mixer will outlast the roaches.

Might be worth regreasing it, iFixIt has some good guides on that.
Those old KitchenAid mixers are beasts. I think they were still made by Hobart at that point and really built to last and easy to fix.
Those are the mixers of legends 💪🧑‍🍳💪

I still listen to my music using a 160 GB iPod Classic. Apple struck gold with that clickwheel. Carrying around a dedicated device for music just for that elegant one-thumb control I don't even have to look at to use is still totally worth it to me.

I could use it through my back jeans pocket. It was great!
- In public would it just look like you're caressing your own ass?
The click wheel also works through fabric. I miss changing songs and adjusting volume without removing it from my pocket.
It's currently not working, but I'm going to replace the battery soon on my 80gb Zune. I fucking loved that thing back in high school. I want to make it my dedicated music device for my stereo set up, as a digital parallel to my turntable

I still keep mine in my car. Have you seen Dankpods mod them with terabyte micro SD kits? Stuff is amazing.

I am the oldest piece of working hardware I own and I am constantly disappointed by it

You probably mean electronic not technology. But I have a mechanical singer sewing machine from the 1800s that's still in working order.

Not at all impressive, but to maximize interactions on a newborn thread:

It's probably my PS3, which I would have gotten Christmas 2008 (or maybe it was 2009?). I recently started sailining the seas, and the most convenient way to watch those videos is to burn them to a disk, and so the PS3 is really just a glorified DVD player (can't even be bothered to use it's blue ray functionality)

Hey, keeping a first gen PS3 running after all those years is more impressive than you might think. Wayyy too many of those cooked themselves on 12+ hr gaming sessions back in the day
Similarly, my PS2 which I got for Christmas in 2003 is still running strong, I replayed Simpsons Hit & Run recently and it the console plays as well as it did when I first booted up.
It also has the honour of being the last device I own capable of playing DVDs since my PC's optical disc drive died.
- Our wii is still hanging in there, though there DVD drive doesn’t like to fully latch and I have to keep the side cover loose too hello it Fully load.
  But I also have a working PS2, PS1 with GameShark that can load pirated games. And a battery working finicky NES.
Same here. While mine is connected, I have no reason to use it with newer consoles in the same cabinet.

I have my grandparents gramophone.

We pull it out each year to listen to their old Christmas records.

It's become a tradition that my university age kids still look forward to.

I have a General Post Office model 711 telephone. I installed a microcontroller into it and it's now the keypad for my home alarm system. It's also hooked into Home Assistant so I could have it for other things if I wanted.

That is just brilliant!
- Thanks. It has occurred to me to add a voice assistant to the phone as well but I'm not sure I'd ever actually use it.

I got a fountain pen with my initials on it from my grandfather. We have the same initials.

Depending on what you consider technology:

I have several firearms well over 100 years old in perfectly operational condition.

Quite a few kitchen appliances from the 70s that will never die.

And a working Apple IIgs.

As far as use on a daily or near daily basis, I have a 1974 Fender guitar amp, and a few other speakers and musical instruments that are vintage that are also going to outlive me.

What's amazing to me is that for guitars / basses, even amps, the value often goes up for the truly old stuff. Even (sometimes especially) if there's visible wear and tear. The bass I own was one I bought new, so it's only about 15 years old. But, I was just curious the other day so I was searching for basses on Ebay, and they're selling basses that are $50k and are 40+ years old.

Polaroid Land camera, ~1950. Found it after my grandparents passed. Never tried using it, it's just neat.

They're a lot of fun if you can get the film. Some company reverse engineered it and then went out of business, but I think there are still options if you're willing to pay $2 a photo.
- Polaroid is making a comeback. You can get film in Walmart now.
Think my dad has one of those.. he has a bunch of old cameras his father used to use.
I have a Kodak Brownie here somewhere. I've never tried using it, but it should work - the shutter spring is in place and functional. The mirror for the viewfinder is messed up, too, so I might not be able to frame the shot correctly either.

I have a wheel on my bike.

I have cosmic dust from the moon and stars in my body
My bike is made from an element that has been shaped by man into a more useful... shape.
How old is that wheel?

I have a beard trimmer from like 2008. I have literally no feelings about it.

Lmao

Fucking Technology Connections.
I imported one and converted it to 230V. Shit is, indeed, fire.
Got one too. 1952-1957 vintage.

1959 mechanical cameras. An electronic camera from 1969. Polaroid SX-70 from 1976. A calculator from 1988: FX85P from Casio. And then the Atari Lynx from 1991.

A very rare 1965 push button UK telephone, which I converted to work on DTMF.

Almost all UK phones from this era are dial based so it was very hard to find. It is our actual land line phone, not that our landline is ever used. Looks cool though.

A 12" Samsung TV that I've had since I was a kid. If I had to guess I'd say it's from 1989 or so. It still works perfectly except that it now has to warm up for a minute or so. I currently have a Roku box connected to it that I use for watching old shows in SD format lol

If you've not done so, look into replacing/getting replaced the electrolytic capacitors in the TV. They are one of the only parts that truly suffers from aging. By the sound of it, some of yours are on their last legs. If you replace them before they go completely, you can limit the damage. A failed cap can often cause damage to other components.
The caps will generally have their value and tolerances printed on them. They are ¢ each, so it's fairly cheap, parts wise.
- Read this first. CRT TVs have high voltage in them.

My car. 1995.

The most reliable car I ever owned was a 1998 Suzuki Sidekick Sport. I drove it for over a decade. It was the only car from my son’s childhood that he remembers. We got two more with identical parts to move stuff around when it broke.
Now he’s driving it. It’s all to hell at this point, but it’s sentimental to him. It isn’t his daily driver, but he still takes it out pretty often to ride around in the mountains.
That car is two years older than him.
I barely ever changed the oil in it. Speed shifted one transmission too long and had to replace that. The harmonic balancer took a shit once. Otherwise just coil packs and a battery from time to time. Any other parts were minor and yanked from the identical one that sat right beside it. He still has both. I hit a deer with the old one, he hit a deer with the other one before we parted it out. The front is rigged together.
I can’t believe it’s still going.
- Volvo 940, here. I'm replacing it this spring, though. But it still runs fine, and it recently passed inspection. The main reason why I'm upgrading is because I need an extra seat to fit the entire family.

I absolutely cherish it.

I still use my Dad's old hifi from the 70s to listen to records. It's one of the only things I have that was his, so it has a lot of sentimental value to me.

I don't still have my dad's whole 60s-era stereo but I do have the speakers and they're absolutely fantastic. Heavy as fuck with the giant magnets and solid wood cabinets. Modern stuff just does not compare, especially on the low frequency end.
Those are the best systems. They can always be repared, not like the junk they have been selling since the 80s. Make sure to keep it, and maybe get a recap at some point.
- It desperately needs a recap and pot clean/replace, but I need to find someone who can do it.
  I could probably do it myself, but I don't trust myself to not screw it up.
Dude, same with my fiance. Her dad passed a year and a half ago, but left her his Audio Technica SL1200 turntable, speakers, and all his vinyls.
A little gift was in one of the Rolling Stones albums he had, when we opened it up a little piece of paper fell out, and it was a signed concert ticket by Mick Jagger. We were stoked to have that little piece of her dad like that.
I miss her dad so much man

I still use a nearly 20 year old DSLR as my primary photography camera. It’s all personal stuff so the lower resolution and overall lower quality compared to modern cameras doesn’t bother me much. The battery isn’t doing so well after 20 years though, so I’m getting a couple new ones and a larger memory card for it. Hoping to buy a new camera soon and get at least 20 years out of that too, but I still plan to use my current one alongside any other camera as I really like the look of the images it produces.

What's the make and model? I had a Cannon 20D that I used forever, tiny 2.5in LCD. My 7D is collecting dust, but my fave was a A-1 with 800 Kodak.
- It’s actually a 20D too! The new battery really brought it back to its prime, not having to constantly stress about it dying on me has been great

I’ve got an old iRiver mp3 player thats still ticking (as soon as you pop a AA in it. Would play enough music for me and can plug it in via mini USB I believe.

My iRiver is just lying around in a box somewhere. I totally forgot about it. Poor thing. Has some nice weight to it, well-distributed, very high-quality build.
Hell yeah! My H320 is still going strong. Did you rockbox it?
I lived off one of their CD MP3 players back in the day. Was so nice. Also had a Sansa Clip.

In terms of things passed down, I have the original Wii my parents bought for us on Christmas of 2008. In terms of consoles, I have a Nintendo 64 I got off eBay to play the collection of cartridges we had been accruing since the late 90s.

As for the oldest antique item, I have some mechanical slide calculators, two from Australia, one from Japan, and one from the US. No idea the exact years of manufacturing, but the US one is a Tasco Pocket Arithmometer, which I think ceased manufacturing in the early 1900s ( it's been a bit since I last researched it.)

I have a couple of original Nintendos (NES) lying around. Including the one from when I was kids, missing its door because my sibling would toss controllers at it when they lost.
Those controllers are solid.
Also a few dozen cartridges to go with it. Nothing of value as far as I know but future family heirlooms.
- I wish I still had the original N64 controllers. The nintendium shells they were made out of were thicker, heftier. Now I've just got these off-brand ones that don't feel as good.
  Tell you what, though - the joysticks are just as floppy as the originals we had. I'll eventually get those GameCube joysticks to upgrade them.

Gameboy Color with 1st gen Pokemon still running strong

Awesome- very jealous!
Same, game boy color with the clear purple shell and Pokemon red. Got it when I was 8 and the cartridge still saves.
If it hasn't yet, the battery in that cart is gonna die any day.

Not that old but my 2009 i5 750 can still rock most of the games at a solid 1080p. I added a fan and overclocked it to 3.6, some ram and a 1060 gpu. It now serves as our main streaming / gaming computer on the TV and shows no sign of giving up. Overall I've spent less than 650$ over 15 years on a computer that we use daily.

1966 Fender Princeton guitar amplifier. Me likey

My original Atari 2600 and games I got as a kid.

EDIT: I am pretty sure my stove is from the 60's but it came with the house I bought in 2015, so I am not sure it counts.

My mom gave me her Atari 2600 that she had when she was a kid. It still works. It even still had all the cables and games stored with it at her parents' house when they passed.
- Mine is a sears video arcade.
  I have an original 2600 too that my exes dad bought for her when she was little but it doesn’t work any more.
  My console collection is stupid at this point. I have like 15 Sega Genesis consoles and I’m too sorry to sell them.

IBM PS/1

Proud as fuck, as it's my first pc. I'm 26

My Aiwa P22 micro hifi from 1978. Very nice, compact and sounds great.

A 1930s era Sunkist Juicer. That thing is still chooching along and just juiced enough key limes for two pies last night.

I recently bought a 1970s Sunbeam food processor to replace my broken modern one. It's so incredibly quiet that I thought it was broken as well until I tried it out grinding stuff and found that it was even better and faster than the modern one. It is much heavier, though, and a pretty ugly shade of '70s yellow.

I have a GeForce GTX 970 from 2015 that's still doing sterling service every day in my recently refreshed HTPC, delivering 4K movies and the occasional game to my 65in Sony OLED TV. My best tech buy ever.

I just gave mine away, like an hour ago. I recently upgraded my hardware so I listed the old 970 for giveaway since it has very little market value nowadays, and this guy showed up for it, turns out he's the pilot at a nearby scuba centre, and he told me I got a diving session in exchange for the card. Good business
Just put an old 960 in a PC and gave it to my sister-in-law for Christmas so her stepdaughter could play the Sims 4 on it.
I was absolutely shocked to see several games running on ultra settings at 1080p without any issues.
My 970 made it until the end of the crypto boom and GPU shortage. I got a GPU shortage special 2060 that was manufactured after the 30 series release to replace it with

Commodore 64 but for everyday stuff my Alienware X51 R3 is a weird, old Frankenstein monster

Are you keeping up with the Commodore?
My dad was showing us all Moon Shuttle for the 64, some old game he'd never played. And then he pulled out a chip he called "the shadow" that I guess has a history to it. It was a replacement for another chip you'd plug it into the hard drive to... Copy games? But they didn't work or they didn't make enough? He even showed me his thermal printed complaint letter he wrote explaining how long he waited and how many times he was fobbed off.

I have a Panasonic "Genius" microwave from 1983, still going strong.

A multimeter from the 70's, although I don't use it often anymore (I have two newer ones)

A Back and Decker b-100 corded drill from the 1960's with a skill saw of the same era. (Both backups in case my newer ones die.)

Also not really tech, but A scythe from the 1930's, an old clothes iron from the early 1900's (The kind you heated on the stove) a machete from 1920, and a couple old hand pump sprayers from the 20's or 30's (The type you screw a glass bottle onto) that all are functional but mainly just collect dust.

I probably have some other old crap I'm not thinking of at the moment, I just like collecting weird old things.

Mine eventually started stopping after one minute no matter how long I asked it to cook. I guess the brain was starting to go.
- I'm going to cry when mine finally dies. I bought it second hand in 1991/92 and have only ever replaced the light bulb in it once around 98. That microwave has survived both my daughters growing up and a lot of moves over the years.
  Although at this rate I might crap out before it does lol.

I'm still using an IBM model M keyboard from 1989. Picked up a conversion cable to go straight from the weird RJ45 connector to USB and have zero issues with it.

Also using a Model M from 1991, still going strong. Very serviceable too if I ever need to repair it, so long as I can get the replacement parts on ebay.
Woa

I have several of the original Philips LED replacement bulbs, which were some of the very first LED bulbs available. Paid about $35CAD each for them in late 2009 and they're built out of solid metal and weigh a ton. They're still going strong and put out a lovely light.

Pentax ME SLR camera, bought by my uncle in the 70s. Got some dents and scratches but it’s still taking beautiful pics.

Easily beaten by others, but I'm happy that my old Das Keyboard lasted nearly twelve years before it started missing keystrokes. Only retired it last week

I still have a Gen 1 Das Keyboard as well
- Thems is good keebs
You could probably replace the individual switches by de-soldering them.
- I think it's an issue with the PCB itself, it's getting kinda rusty from old spills. I'm saving it of course, it still mostly works and I love the case and keycaps. Maybe someday I'll create it anew with even louder switches and a fresh PCB.

1976 Gottlieb Volley pinball machine

High score?
- 313k

My dad has a 65+ year old tube radio that still works great. Sounds amazing too. It was my grandfather's radio and it's older than my dad is we're not sure how old it is exactly.

SNES purchased by my parents in 1992.

An old blade server I was able to take from my very first job, state of the art for the time it was made around 2002. It's still running and I've been using it as a media and hosting server for years despite how out of date the specs are now.

Bang & Ollufsen record player from 1977

My Atari 7800. Had to replace capacitors and a transistor to get it working again. Also added composite AV output.

1975 Gibson Grabber bass. Instead of having multiple pickups, it has one pickup that you "grab" and slide across the pickguard. I had to get the fretboard re-set, as it had been sliding down the neck and making it impossible to intonate.

Terrible design, but it's a unique piece of music history that I enjoy having on hand.

An electronic typewriter that my parents bought when I was entering highschool in the early 90s.

While my first works of fiction we're not written on it, my first fiction I ever submitted (it was rejected btw) to a publisher was.

I wouldn't get successfully published until the late 90s/early 00s after I had built my first PC out of scrap parts and a cheap copy of windows 95.

But that typewriter still holds a special place in my heart.

Mines not so interesting, but I do have an original N64 from launch. I wish I had picked up the gold plated Zelda console, but I instead grabbed the regular grey one that came with Mario...I had never played a Zelda game before and regret the decision today.

If I'm going even older, it would probably be the planer that my father made about 50 years ago. Still works amazingly for being all cherry.

My mom's morantz receiver from the late 60s.

A pair of vertical speakers with three elements each made by my father in the early 80s and the paired amplifier that he built at the same time

- sure thing, right now I cant but I should be able to do it in a few hours !
- Here it is :) Sorry for the quality! https://imgur.com/a/LlRnloT

This isn't entirely uncommon, but my 20 year old car is in perfect shape, fully paid off, and can do any job. I'm proud of that thing.

1940 Turkish Mauser (8mm), at the newest 83yo. But that year's production was cobbled together from old stock receivers and barrels made just before 1900. So parts of it could be ~120yo.

Might not be tech now but in the late 19th c. the Mauser bolt action was absolute tech.

A 1960s electric meat slicer. Use it every Thanskgiving. That thing is built like a tank and a probable fire hazard.

A 70s crockpot/fryer. Another fire hazard that is relegated to hot buttered rum and frying food.

More recent would be a 720p Samsung TV hooked up to an AppleTV HD we still use in our Master bedroom, mostly for classic movies on TCM. We’ve had it for 15 years and she’s still kicking.

That thing is built like a tank and a probable fire hazard.
Back in the '70s my parents got gifted an electric hot dog cooker. It basically had two rows of electrode spikes and you'd stick a bunch of hot dogs between the spikes and electrocute them. Dangerous as fuck since it had no kind of guard or anything - and how hard is it to just boil hot dogs anyway?
- That’s crazy! I’ve never heard of that. I love hot dogs and haven’t had them electrocuted. Any good?
I have a 70s meat slicer as well. Brings back a lot of memories (growing up, my parents used theirs at least weekly).

A Singer sewing machine from before the Great War.

10 year old Dell machine that I’m using as my home assistant and Plex server. Picked it up on Facebook for $30, tossed new ram in for $10, and a new SSD for $40 and it’s snappy and does a great job. And the SSD will go to any new machine.

One of the first projectors that could do 720p from 20+ years ago. Kinda crazy how bad it seems now while being state of the art on release

I’m rocking one too bud. :p
I like hooking the old consoles to it.

Should be able to dig up a fully functioning Sony Minidisk player. Owned and lost quite a few of them over the years. Damn things were sleek and small, but they meant the world to me. Napster and then Limewire provided the mp3s thanks to the old 56k dialup modem, then a mini jack connection from PC to the Minidisk. It took a hell of a long time to get everything set up just so, but it was worth it. Every time.

Those things were sooo cool!!!
I used my Minidisk player a lot for radio interviews. A nice little machine. You could run over one of those disks with a steamroller, then drop in in boiling water and it would still play just fine.

Until recently, my daily driver laptop. ThinkPad x200s from 2008. When covid hit I started using my desktop and a month ago I tried the laptop and it doesn't turn on anymore :(

Nowadays nothing noteworthy... maybe my smartwatch, Samsung Galaxy Watch 1.

If it's not just the battery finally giving out, it might be the thermal goop on the CPU / GPU. Late IBM Thinkpads could eat fans annually. Early Lenovo models can't be all that different. Thermal cycling is a rude source of stress... as is the sudden end of routine thermal cycling.
- Also the BIOS battery. At least some from the late 90s refuse to do anything if the Bios battery is dead.

Quadrophonic 8-track player. I use it as an amplifier.

I also keep a copy of "Star Wars and Other Galactic Funk" by Meco loaded into it. It's a disco/jazz fusion that's truly horrible, but authentically 70s.

If a razor counts my Gillette Fat boy (~1954). If you're wanting to know about electronics the motherboard/ram in my media server(2011). I have older stuff around but not in active use.

Probably my speakers. They were custom built by one of my dad's mates in the 80s. Not sure when exactly.

Clock radio is from around 1979 I think. Stereo tuner from 1978 (Sansui TU-9900!).

Oh, I have two functional tube testers from the 1950s. Also a short wave radio from about 1950.

I like old stuff.

1961 Gibson Discoverer Amp. Found it in the basement as a teen. Replaced the fuse holder and fuse. Powered up all the tubes no problem and still running strong today.

altec lansing speakers from 2000.

I was still using my Yamaha speakers I bought in 1999

My rather ancient audio setup: a Yamaha RX-496RDS stereo receiver with a Vestax PMC 17A Mixer and T+A Triton R130 speakers for 2 (lame ass) Gemini PT 2100 Turntables (through a preamp) and some PC-Audio. Most of this stuff is from the 90s or early 00s. Wasn't the best setup in the first place but it still works fine to this day and probably even beats some of the contemporary bluetooth thingies.

Have there even been much development in sound quality of speakers over the year, that is hardware?
- I'm not an expert by any means, but I don't really think so. I think hi-fi audio is one of the few fields in which technical development is stagnating or even lagging behind in terms of sound quality. This is probably mainly due to the fact that the quality of streaming files is much poorer than that of lossless formats on data carriers such as CDs anyway. The same probably applies to wireless solutions. Streaming and wireless audio transmission is of course much more user-friendly, but in terms of audio quality it is probably not a step forward.
- Old speakers had enormous, heavy magnets and were great at reproducing audio, especially on the low end. The only major "development" with modern speakers has been the ability to sort of reproduce sound with lighter-weight, cheaper materials.
Wasn't the best setup in the first place but it still works fine to this day
Lmao same with my audio setup

I’ve got planes and a chisel from late 1800s, some of the best tools I own. The steel of the blades is fantastic, and the feel of the handles after more than 100 years of being handled is fairly unique

I was thoroughly impressed by Technology Connections exploration of the Sunbeam automatic beyond belief toaster. Bought one cheap off Craigslist a while ago and added a ground wire. Works great.

I also picked up an IBM selectric pretty cheap, mostly works.

I’ve got plenty of stuff that’s older than I am. I’ve got mechanical cameras dating back to the 1930’s, electronic camera’s from the 70’s, watches dating back to that time as well. And there’s game consoles dating back to the NES, like many here.

I like old tech. Just because it’s old doesn’t mean it’s bad or unreliable. If you treat stuff well and maintain as needed, a lot of things will outlast you. I’ll be shooting film in cameras that are a hundred years old in a few years.

Got my grandpa's Minolta XE7 in the bag on my way to visit my daughter for the holidays. Not my oldest camera, but he's not around anymore so there's some nice sentiment capturing family moments with his camera. Security hand checked the film, no questions asked, so that's nice. Couple rolls of HP5 to push for inside, and some Gold 200 if we get some sunny weather.
- I own a few Minolta's, including the X500 and X700. Those were basically the last of their manual focus SLR's. I love classic bodies like that; metal built bricks that feel solid and chunky to use. I also bought a ton of Minolta glass back in the 2010's when they stuff went for pennies on the dollar on Ebay. Good glass is good glass, right?
  I've never shot HP5 myself; I tend to be more of a Fuji shooter in general with Acros for my B&W needs. I've developed my own rolls, especially when I had to shoot that in cut-down form in Minox cartridges. Not exactly the kind of thing you take to a one hour photo place :D
  Though I've also shot stuff like Tri-X 400, Ektar and a bunch of other stuff from Kodak and Fuji over the years. But the thing I absolutely LOVE to shoot is slide film. Velvia 50 & 100 in particular. Absolutely amazing to see slides on a lightbox. You get a lovely depth and color that you just don't really see in other negatives in my opinion.
  I actually just bought a Fuji X-S20 camera which includes a bunch of film simulations, including Acros and Velvia. That's how much I love shooting those, that I want to bring that fun factor to digital as well :D Also own a Fuji X100S, which I found out is a 'TikTok trend' apparently...

As far as "daily driver" tech, Motorcycle is 43 years old. My razor is 103 years old. Luckily I'm closer in age to the motorcycle.

AKAI S-1100 sampler. It is still in mint conditition, released in 1990. It was a studio standard in those days. I don't use it that much these days, but the time stretch on that machine is amazing. For Jungle and Drum & Bass it's an essential piece of hardware imo. The Prodigy for instance had two of them 1100's in the studio and on tour if irc.

My Amiga 500 is from 1987.
But I think the stereo & LP player in the living room is from the early 70s.

Pinball fantasies anyone?

A microwave from 1997. I give it most of the credit for staying alive. It's a brick house.

1979 Sanyo Record Player. It was my mom's and she bought it in high school

HP Touchpad from 2011 that was given to me.

I try not to hoard stuff in case I ever need to relocate, so my list of owned items isn't big. I would love to collect retro consoles otherwise.

I miss my Touchpad. Palm was ahead of its time by making all mobile apps web apps.
Oh well. The HP firesale was one hell of a send-off at least.
- That tablet was the bomb at the time. I ran android on it when webOS was discontinued. It kept up for a while but i saw an OLED tablet that gave me eyegasms.
I had to sell off/donate most of my stuff before moving abroad. If that’s a goal for you, nothing wrong with keeing minimal stuff.

Best I have is an old Midland Gun Company double barrel shotgun that belonged to my great-grandfather. Passed through the Birmingham Proof House and bears 1904-1925 proof marks, but doesn’t actually have a date stamp, my understanding is that they didn’t start date stamping until 1921. The company was bought by Parker-Hale and the records were subsequently destroyed in a fire, so I’ve never been able to find out exactly how old the thing is.

My toaster, similar one here. It was the toaster that I grew up with. My father in turn bought it at a garage sale. I recently tracked down the history and found that it was manufactured in the 50's, so it's been in near constant use for around 75 years.

Nokia 3310, it even spent a good 20 min submerged because a 9lb pike pushed my parents out of the canoe and had to walk back to shore

Some old corded drill that my dad had. It's supposed to have a reverse function but it only goes one direction now.

I've got no idea when it was made.

My microwave from 1985 which came with the house.

Technics SL-1900 turntable from 1977, it was a pretty midrange model for its time but it sure as hell is better than any deck you can get new today. The only thing that doesn't work is the dampening on the tonearm lift/lowering.

That's a nice turn table and you should be happy to have it. But, it is definitely not better than any deck you can get today.
- Oh? Like which one?

The original fat PS2 I got for Christmas 20-odd years ago. It still plays games perfectly fine if the discs aren’t too scratched up (RIP my bro’s copy of Marvel vs Capcom 1).

Not sure how loose you define tech, but mine would be my motorcyle, a 1981 Yamaha XS400 that my grandfather gifted me. It's certainly feeling it's age, so it requires a lot more effort on my end to keep running than most bikes made this century. It's not made for modern highway speeds, it's not happy when I try, so I keep it off the interstate, 50 and under. That said, when the weather's good, I've never had a carbeurated engine start so easily, and it's a joy to ride!

What gives you the most problems? Fuel delivery?
- Honestly mostly just age related stuff. It spent most of its life leaning against a barn wall, so even though it had low miles when I got it, everything was feeling the age and a lot of maintenance items came due very suddenly all at once. The muffler basically desintigrated one day as I was driving it, had to patch a hole on one side and replace the other entirely. Then it was seals, just about everywhere except the pistons (thankfully), so I've had just about everything except the actual engine block out at some point or another.
  Shockingly the fuel system is rock solid after replacing all the rubber bits in the carbeurators. Sometimes I have to use the kick starter in colder weather, but usually I can pop the choke out and the electric start gets it going in 2 cranks.

60's electric drill.

Original Xbox console with a copy of Halo Combat Evolved though the console would probably pop if I plugged it in

2004 Wacom Cintiq 21UX. Drawing on a screen that large and heavy is awesome. I built it into my desk and can raise and lower it from flat to nearly 90 degrees. The brightness has faded over the years, but I won't let it go until I can afford a new one (equivalent $3k + today). I can barely work in PS with just a mouse anymore. It spoils ya.

Type Mike IBM keyboard......goddMm indestructible.

My Harman Kardon pc speakers. They are as old as I am. Here's a pic of the same model I found online.

I have a Sunbeam Radiant Control toaster from the 1960s. It’s an elegant, automatic design with only one control for the amount of toast. If it had slots wide enough for bagels it would be perfect.

Octopus Game&Watch from 1981.

The gameplay is still fire.

Try it out here at archive.org

Oh nice. I have a Mario Bros game watch. Think it's from 86 or something like that.

If a pocket watch counts, then my Hamilton watch from 1908. Oldest electronic would probably be my NES.

I have a Sony Erickson bluetooth headphone adapter from 2005. It still works perfectly and the battery has good life.

My hammer.

Also, an axe. Arguably, …fire?

Only if the fire has been continuously running. Otherwise you started a new fire.

Video door-phone from the eighties. The screen is crap but hit a few times and it works lol

My old and trustworthy Kenwood KRV75R receiver. From around 1985 and still rocking!

My oldest piece of tech would probably be my C64 or maybe an old camera I have. But the one that I'm actually proud of is my car, a Mercedes W124 from 1988. It'll be hard to find a bolt on that car that I haven't touched and I'm finally getting it where my even my perfectionist self is happy with the way it looks and drives.

I have Lenco turntable from 1969, making it roughly 54 years old.

It's been over a year since I unboxed it, but my Nintendo 64. Last game I played was Majora's Mask and it suffered a hard reset in the stone temple that made me box it back up.

Playstation 2 slim and an original PS2 controller. Still runs really smoothly, at least for tech at the time. Disc drive is really cool.

My Yamaha speakers that I got in 1996. Beautiful sound from them. The receiver and other things have long since been replaced.

Still have running? Probably my Sega Genesis model 1, bought a month before I was even born in 1991, though I rarely use it as emulation is easier.

Still use daily? Probably my gen 3 iPod touch, circa 2009.

Dynaco ST-70 stereo tube amp, probably from the 60s (no date on them that I can tell).

Very proud of it, got it for free at a garage sale. Replaced selenium rectifier with silicon diodes, a few new caps, and new tubes. Sounds great.

An Acetronic MPU1000 games console, from the 1970s - 76 or 78 I think. Still worked last time I powered it up, I also got some extra games cheap off eBay a while back, interesting playing something other than the three or four games I remember from childhood.

Daily? Logitech MX-518. I'd still be using my CeBIT 2003 IntelliMouse if it hadn't been jostled by one too many trips in a backpack. Both are newer than the Max Payne mousepad that is somehow still in tolerable condition.

No, wait. I just glanced at the time on a Westclox digital alarm clock, model 22636, production code 1/10/83. That thing's older than I am. Had to check the underside again: Norcross, GA. I was unsure if "Westclox" hinted at being produced in West Germany.

Probably one of my CRTs from the early 80s, unless we're counting basic stuff like my house wiring or gate speaker.

My ps1 probably. I just played with it yesterday and I loved it.

Probably an nes or vcr. I have an Atari too but it's not hooked up so idk if it still works. I have some old film projectors too

I have a TI 99/4A PC that still works! It has a super weird version of BASIC and I don't have any tapes for it, but it's a cool display piece. I was able to make an educated guess that it was manufactured in 1982 based on the design

My dad bought an amplifier in the 70s, I still use it for my TV audio system today. Super solid stuff.

I have a Milling Machine with a 1902 patent date on it. It was converted to an electric motor, but the line shaft pulley is still on it.

My Nintendo DS.
Somehow the battery is still charged and went multiple times from red state to a green state.

Newton MessagePad 2100. I used it daily from 2008-2011 (well after I had an iPhone) for office work and everyone thought I was crazy but I loved it. I still prefer the ui for calendar/contacts/note taking compared to everything else out there.

A few, a silver Pikachu Gameboy color, some synthesizers from the 1980's, a unique guitar that I've only been able to find documentation of 1 other one online (Ibanez Nitro full wood body finish - it's certainly a custom). And I think the last pride and joy is my Sony MDR-V600's.

Anybody remember Cube World? Those little electronic cubes that you could magnetically attach to others and they could interact? Got a set of those too.

The music stuff is the oldest but it's mostly second hand so it's harder to claim. The headphones were a gift and new back then though, so they're for sure, same with the Gameboy color and Cube World. Heh :)

- Ah I guess some made it sound a little cooler than it is, my apologies for the hope!! It's just a Casio HT700 that I got at a thrift, it's not bad but it's not anything super special.
  I had bad syntax, I have some aged synthesizers, one from the 80's... That's the only one lol, I think my others are mostly from the 2000's, like the gakken sx-150 and the midiman oxygen 8, an Ibanez Bass Synthesizer pedal (SB7). Oh, speaking of pedals I do have a Snarling Dogs Bootsy Collins Wah/Fuzz which is pretty neat!

I would say my Sega GameGear, but I just went to turn it on, aaaaaaand it's probably well past time to replace the caps. And screen. And motherboard...

The oldest thing that runs on electricity in my house is probably a tie between my washer and dryer. Both are Kenmore 80 series from the early 90's. I've repaired them a number of times and will continue to do so.

I also have a late 90's vintage Magnavox tube TV which is in working if slightly twitchy order. I set it up every now and again to play SNES games on. The picture's gone slightly orange and depending on what's being displayed there's a notable coil whine, I'm sure it needs to be recapped.

I still have my original SNES, it doesn't work and I'm not sure why. One of its controllers and all but one of my old cartridges is still working. It's not going to be long I'm going to have to change the batteries in the games. Weird to think my copy of Link to the Past has had RAM turned on and running for 33 years straight.

I've still got my RioVolt mp3 CD player. The in-line remote died but the machine itself works fine. I've had it since 2001. I'm very fond of it.

As far as computers, I still have my high school HP Pavilion desktop, and it does still barely boot to XP, but I don't use it for anything. I have a Dell Dimension with an old 3-digit Core i7 circa 2009 that does still see some use as it's supported by modern Linux and yet it's got old shit like a PCI slot, optical drives, firewire, extrenal SATA, so it's a useful tool to have around if I have to play with Dubya-era electronics.

NAS, 2015. Not too old.

a core 2 duo full tower pc from mid 2000s

first it had win95, XP, 7, now runs void Linux

The CD player i found on the curb. I had no idea how old it was but i looked it up for this thread and it has user reviews from 2007.

Sony CMT Nez50

Works great, 15 volume already feels loud

I know this isn't what you meant but, this week I restored a large format photo enlarger from the 1950s. A Beseler 45 MCXR. I am extremely proud that I was not electrocuted, and I printed a 4x5 negative as a Christmas gift for my mother in law.

the oldest is one of my portable cassette recorders, a very early GE model that is in near perfect condition. It's so early on it doesn't have much info online, and seems to be rare, but unwanted.

The one im the most proud of is my IBM LexMark model M keyboard, It's older than me, abused to hell, modified, and is still my daily driver because it's so comfortable

My N64. I probably have a few pieces of tech older than me, but I can't think of them off the top of my head.

I have a PC from 2004 as well.

Two game boy DMGs, one kept original and one modded with a new shell, membrane, and LCD screen. It's a great hobby restoring them.

An electric turkey-carving knife, made in 1962. GE built it to last.

As for daily usage and "tech" - I have a Samsung Galaxy S1. The battery still holds a charge and it's being used on a near daily basis (for very simple stuff). Runs Omnirom with android 4.

!buyitforlife@sh.itjust.works

Also !buyitforlife@slrpnk.net which is pretty active
Edit: whoops accidentally tagged the community as a user lol

Within reach on my desk, Unisonic LC-384 Dual Power Solar and Battery Backup Pocket Calculator - I've not owned it the whole time, so I looked around and see it was produced on or around 1982. It works just fine.

It has a minimal listing in the Calcuseum (http://www.calcuseum.com/SCRAPBOOK/BONUS/32532/1.htm)

I have a Sony M2 Micro card with inside it's USB adapter.

I've used it to install countless Linux distros since 2007 😅

I have an early 70s waffle/sandwhich maker eletric grill. Was a wedding gift to my parents and i grew up eating food off of it. Works flawlessly. But its just coils hooked to 120v with a regulator. Not much to break

Twenty- seven year old wireless keyboard. I love it. Feels great and never fails me. Don't know what I'll do when it finally dies.

I have some railroad stock certificates from the late 19th century that I need to frame. They're a few bucks on ebay and really freaking cool

In terms of electronics, I have some model trains from the 60s and 70s that are pretty worthless but keep going despite the abuse and lack of maintenance thanks to electric motors being so simple and easy to maintain. Other than that it's probably a shoe in between my wife's N64, PS2 and CRT TV, an old police scanner I got off ebay, or the early plasma TV that I got from my parents who got it from my aunt who got it with their house.

Technically speaking, it's the 2TB platter drive full of games that I've pulled from computer to computer over the last 15 years or so. Everything else has failed or become obsolete, but it's still kicking, miraculously.

14 year old Wacom Tablet. It still gets regular use.

A 1930's Remington mechanical typewriter. My dad used it regularly until he passed away, it still works perfectly and I've got a whole box of ribbons for it.

I got an Apple IIc. Drive, monitor, keyboard all work.

Nokia N73 counts?

I think my PS3 still works, although I haven't used it in awhile.

It's either my alarm clock or 5.1 speakers, both of which would be somewhere over 20 years old.

My fat PS3. Still a good Blu Ray and DVD player.

Probably the 20-year-old microwave.

A pan-clock, that is a clock that has the shape of a pan. It's probably close to 40 or more years old. pan-clock

If we're including family consoles, I'm gonna say the family wii my family got in the late 2000s. I was actually pretty pissed when we couldn't find it when it was in temporary storage because there is one mii that I would have been absolutely furious with myself if I couldn't remake it on my switch. Luckily we did find it and I've managed to recreate all the miis we had on there onto my switch, especially the one mii my grandma made.

I have a Vendomatic sewing machine form the late '70s or early '80s. Still works like a charm. I still use it a couple of times per year to make/fix clothes or sew badges on my heavy metal jacket

Well, not that old, and even typing this hurts me (and apologizes to all that are hurt too lol), but I just played a lot with my PSP GO and my DS Lite this week, and in a related field Jackie Chan for PS1 in my Anbernic RG351V (old software in this case).

Apple IIe even has a dot matrix printer still in operation (paper running low though)

But probably my oldest piece is my Beale upright piano, made in the 1920s, still beautiful, still hammering out music.

i have speakers from somewhere in the 1980's made in the soviet union

1955 Moskva-5 Camera in perfect condition.

It's not too exciting, but I've got an old Lenovo EMC2 NAS that's probably from the early 10s. I was also running a Pi 1B as a DNS server until it gave up on life.

Olympus OM 10. Bought it second hand a few years ago, when I felt I need film cameras back in my life. Must be from the early 80s. I only use it since maybe 4 years now, but I love that camera.

Oh, while I am typing I just remembered my Braun Paxette from the 1950s. But I don't like that camera and thus don't use it. Planning on selling it tbh.

I have a a working box camera from 1930's. Or it would work, if I could still find film for it at a semi-decent price.

My Sansui 1000X - receiver amp is in daily use and was made in 1971, it's in near mint condition in every way. I did a complete internal cleanup and replaced a few electrolytic capasitors just to be sure to avoid any problems in the future. I believe the unit may well outlive me. I love the silverface-teak cabinet aesthetics. It's paired with a Lenco - L75 turntable from the early 70's and AR-7x speakers from the same decade, together they sound pretty much perfect to my ears.

And I also have my great-aunt's windable table clock. It's ~100-120 years old, but still works if only I remembered to wind it every other day.

Is a wristwatch considered tech? My daily one is from 1971 and with a service it keeps time way better than a lot of new mechanical watches.

I have a 600w ham radio amplifier from the 60s. It's a Heathkit SB-200

I'm very proud of it because I bought it in rough condition, and repaired it myself. Replaced all the leaky capacitors and did some other work in there. Now it runs like a dream! It was my first time working with tube gear. The voltages in these things is 2500 volts, that'll kill you dead before you know what happened.

I also have an SB-220 that I got broken. I fixed it up but didn't do a full rebuild on it. It'll do 1200 watts, but I don't need that much power so I haven't used it much. It's in storage. That one is from the late 60s early 70s.

My next oldest device is also ham radio gear, a Kenwood TS-530S from the 80s. There's a lot of solid state stuff inside, plenty of transistors doing all the work. But the final output stage is still a good ole pair of tubes. I bought this in non working condition, and fixed it myself as well. Good fun!

A OG gameboy transparent hood

Nokia N95. It is practically a dumb phone now and the battery lasts for 30mins but it holds lots of sentimental value.

My gas stove with an electric oven. It works, but barely.

GameBoy Color with a single game: Pokémon Red.

Next time I was able go to the shop they had upgraded to GameBoy Advance and no GB/GBC games were to be never found again. It was the best/worst thing I ever got. :'(

Got an Alphasmart Neo, it's basically a keyboard with a big enough unlit screen with a printer port and computer port. The original Neo model was made around in 2004-2006 and was made by Apple employees with education and disability in mind.

For the longest time I wrote on laptops and tablets but the fragility, battery power and eye fatigue made them not as suitable for continuous writing. I had the money and saw others talk about the Alphasmart devices as being the best writing tool, so I got it.

It's been 2 1/2 years and the batteries I put in are at 60-56%. The device takes 3 aa for power and a coin cell (like for weight scales) for the memory. I can spend the odd multi-hour writing sessions without ever worrying about the device dying from lack of power. And it takes a lot of writing to get the aa batteries to run down a few percentages.

Features:

Nearly indestructible exterior
Turning it on/off and navigating between menus and screens takes seconds
8 file (tabs) buttons to keep 8 projects open at a time
Each file autosaves and can save the projects into named files to keep it in the memory
All or individual files allow for password protection
Just words on the screen
Has find, replace, word count, file storage %, wpm, dictionary, thesaurus and calculator
Uses basic keyboard commands for text (Mac or windows keystrokes)
Detects sections in the file by how many blank lines are inbetween (1-9 blanks and is set up by the user for how many blanks count as a section break)
Change font sizes and 'mod' for custom fonts and set screen contrast
Stop accidentally turning the device on by setting on to Enter + On
Allows other keyboard layouts (QWERTY, Dvorak, right/left hand for disabled users) and special characters
slow and sticky keys
Allows Spanish writing and dictionary somehow

Most of the features I dont use but they are nice to have. The biggest plus is that it is not tied down to proprietary software or cables. It uses a printer cable (I have a regular one and a c-cable one for my phone/tablet) and all I need to do is select a file button, plug it in, get a blank document ready and hit the send button so it types everything out as a keyboard emulation. It is faster to get files with software but it is not a requirement.

Best device I spent my money on.

Samsung S4 mini. Can't believe it is the 3310 of the smartphone world, undestroyable. It's just for streaming kids shows but I take care to bring new ROMs on it, actually android 13.

haven't checked it in 4 or 5 years but I think my Mac Plus still works.

My clock radio.

Microwave from the 90's sometime. Still in daily use and shows no signs of stopping.

Does a "Red October" piano count?

Technically my doorbell, it's older than me.

1986 IBM model M keyboard. Still works clacking great.

I have a spring/crank music box stuffed animal from when I was born (several decades) that still sounds perfect.

Mine’s the 390t with 256mb of storage. So it’s one of the ones that’s triangle in shape with a real smal lcd screen and takes a single AA battery. Suuuuper simple to just plug in with mini USB and drag and drop mp3s over.

A Galaxy S5690 Xcover phone from 2011 as reserve phone, software modded to be nice and fast. Not ancient, but as a reminder of what you could do with 200MB RAM (300MB is reserved for system) and 150MB internal storage. Btw, standby time is measured in semesters.

My dad is farmer, he has a water pump from 1971 still in use.

Not tech exactly, but does a 22yr old Vicks inhaler count? It's somehow stuck around through every move, and I can still use it when I have a stuffy nose. It's kinda nuts...

I have an old CD Walkman that still works just fine. Although looking at the logo alone, it's most likely made after the year 2000, so it's not that old.

Probably my Canon 5D Mark II DSLR that I bought at launch (2008). Still works fine hundred of thousands of clicks later, multiple trips across the world, etc etc. It even still holds a candle to my current camera on the photo side of things (video specs definitely dated now though).

A singer 29k53 treadle sewing machine from the 1930s. Nearly identical to this one:

It was originally made for sewing leather shoes and boots -- hence the boot shaped tray. I use it for heavy duty sewing and leather working.

I considered adding a motor, but the hand wheel and treadle give a massive amount of control. On repairs I can usually put each stitch through the existing holes in the material without the machine getting away from me.

A 1960s electric meat slicer. Use it every Thanskgiving. That thing is built like a tank and a probable fire hazard.

More recent would be a 720p Samsung TV hooked up to an AppleTV HD we still use in our Master bedroom, mostly for classic movies on TCM. We’ve had it for 15 years and she’s still kicking.

I’m still rocking an old CA tv (it’s missing the R). It’s an L32WD12. It does 1080i.
Someone I knew bought it for over a thousand bucks back in the mid 2000s and one day half of the picture went black so they gave it to me.
A cable in the back of the tv was heating up and shrinking and disconnected itself. I took off the aluminum heat shield (which is what seemed to be causing the problem) and stuck a piece of a credit card in there between the cable and the connector to hold it down, taped the cable so it wouldn’t move much. I have been using it since about 2009. I’ve had to push the cable down a few times, so I just busted a hole in the back so I wouldn’t have to take it apart any more.