When the 'popcorn' button on the microwave is 3 seconds too long
When the 'popcorn' button on the microwave is 3 seconds too long
I've never fully understood how the 'popcorn' button on microwaves work (I've read different things that may or may not all be true depending on make/model), but my current one always runs for exactly 3 seconds too long and ever so slightly burns the popcorn.
It's not burned enough to throw it out, but it does give a noticeable "burnt popcorn" smell that kind of ruins my day.
So instead of pressing "popcorn" and doing something else, I have to stand there and watch it to hit 'cancel' in time.
I've never fully understood how the 'popcorn' button on microwaves work
Say no more. Must watch
Sometimes I think the internet needs an Alec symbol to shine anytime Technology Connections needs to be invoked.
I imagine it would be like be bat signal, but look like hand painted LED Christmas lights or something.
TLDW: The moisture sensor might be on the right side of the microwave, and the bag was pointing left when the steam was released.
But that was definitely worth a watch.
Would that mean best practice is to point the most-likely-to-pop-open end towards the center of the rotating plate?
Thia is exactly the video I was thinking of. I only came across his channel recently, and it is an absolute pleasure.
I have watched this man explain the refrigeration cycle, where he dicusses what latent heat of vaporization is in so many videos, so many times over, and I still could not tell you how it works.
But that doesn't mean he's not good at explaining it, it just means I have too much of a caveman brain to understand it.
If you haven’t watched the dishwasher one, drop everything and go do it now!
This is definitely one of the best YouTube channels. I should probably consider being a patron, tbh.
He is also really active on the fedis so that's a plus
I'm sure others have linked to Technology Connections' video on the subject below, but there are two general ways it works:
-
There is a humidity sensor in the microwave that will sense when food is done. In the case of popcorn, it senses when there's a burst of steam inside when the bag inflates enough to open the vent, and then given how long that took it calculates how big the bag of popcorn is and thus how long to keep running the microwave for. The other sensor cook buttons look for trends in humidity that have to do with other foods. The microwave will likely indicate that it has this feature with the word "Sensor" or similar branding on the control panel, and when you press the Popcorn button, it just starts running because it can figure out everything it needs to know for itself.
-
Small, cheap microwaves probably just use a timer. If it asks you if the bag of popcorn is small, medium or large at the beginning, it's just a timer and you should just go with the instructions on the bag instead.
It's a damn shame that we haven't built a microwave that actually listens to the pops and stops when the pops slow, just like every bag of popcorn instructs you to do. We've got gun shot detectors; you'd think we could build a chip to analyze popping popcorn.
-
It's not quite as convenient, but I switched to making popcorn in a wok. It's faster and way, WAY cheaper.
Granted that this isn't microwave related, but it's definitely popcorn related. Have you ever heard of a popcorn cannon? They're designed to even be able to pop regular corn right off the cob...
I've seen those both on YouTube and at festivals. They're pretty cool.
Personally, I don't even like opening a can of biscuits because of the 'pop', so I don't know how I'd feel about using one of those at home. lol
I do prefer to pan pop, but sometimes I'm just lazy and want to throw it in the microwave and only press one button.
You have a button for popcorn?
I always thought it was weird that they don't just stuff a cheapo little microphone in against an interior panel and write a couple lines of code, when it detects 3 really loud sounds within 1 second disable the timer, and when it detects a sound after a 2 second gap, turn off if no new sound detected within 2 seconds
That's just how microwave popcorn is. I just put the microwave on for 9 min or whatever large number is easy to start and wait until the popping slows to a second or two between pops. There's no way to have a perfect amount of time for all brands and packages of popcorn. Not to mention shrink-flation has made the time need to be shorter and different altitude changes how long it takes among other things. I have heard that some microwaves actually have been made with a microphone to listen for the time between pops, but I've never used one. But since they can't be adjusted for your preferences, I've heard they usually burn it anyway. It's always better to have it a little under popped than a little burnt IMHO. Once you do it a few times for a particular brand you'll find the right amount of time if you need to walk away.