I installed Linux on this 8-inch mini laptop, and it's my new favorite way of computing
I installed Linux on this 8-inch mini laptop, and it's my new favorite way of computing
I remember having 10 inch netbook. It was okay for a while, but I would never want to go back to 10 inch display on a laptop. It's just horrible to use. 13 inches is ideal for me =)
Well, at least it's 1920x1200 resolution. The old 10" netbooks mostly had 1024x600 which was terrible even by standards from 15 years ago.
I've got this little tablet...you know how so many people turn an iPad into a crappy laptop by adding a keyboard cover to it? Well Lenovo turned a laptop into a crappy iPad by making the hinge a floppy skin flap with a magnetic pogo pin connector. I intended it as a little computer I can use in the wood shop, I wanted something fanless and preferably with a removable keyboard so it wouldn't be destroyed by sawdust that can run FreeCAD natively.
I'm not sure Linux is ready for tablets. FreeCAD is not ready for tablets or laptops, holy fuck it's unusable without a 5 button mouse and a spaceball. I may have to distro hop a little on the thing because it likes to wake up with the keyboard attached, not recognize the keyboard, and stay permanently in portrait mode. So wake up the computer, rip the keyboard off, wait a second, reattach.
It's kind of fuckpuke, tbh.
10 inch screen size isn't a problem though. For a general laptop I'd want to go 13 inches but for something I'm mostly going to use as a tablet and then occasionally as a laptop 10 will do.
I’ve got this little tablet…you know how so many people turn an iPad into a crappy laptop by adding a keyboard cover to it? Well Lenovo turned a laptop into a crappy iPad by making the hinge a floppy skin flap with a magnetic pogo pin connector. I intended it as a little computer I can use in the wood shop, I wanted something fanless and preferably with a removable keyboard so it wouldn’t be destroyed by sawdust that can run FreeCAD natively.
I have an 11" M1 iPad Pro with a Logitech keyboard case. It was intended to be my "laptop". Clearly that didn't work out, as Apple hath decreed that running full-blown VMs on hardware that's more than capable of doing so is not allowed on the iPad, despite the fact that the same hardware runs Mac OS in the Macbook line.
I have a Thinkpad T14 G1 now.
I did the iPad-only thing for a year back in 2019/20 and while it was fine, I spent much of the time low-key irritated by the shit I had to jump through hoops for. Shit that a regular computer can just do.
By the end of my experiment it was abundantly clear that Apple had 0 interest in making iPadOS more useful for anything more than whatever its apps could do. Five years on and my opinion hasn’t changed. I still use an iPad (mini), but mostly because it was a gift which comes in handy for note taking.
I barely use my iPad these days. I'll pull it out every once in a while, like if I'm sick in bed and wanna watch youtube for a few hours without holding my phone, but otherwise, yeah, iPads are kinda useless. They even suck at filling out PDFs.
To be fair, an iPad can be used for way more than the average punter will do with theirs. I used to broadcast my radio show with mine, using a mini as a midi controller for my mic. It was pretty cool.
But yeah, for all the workarounds and hoop jumping I had to do, Mixxx could do it all on a regular computer, for free.
So these days mine is a social media / note taker / third screen for my Mac. Very much not worth the £600 Apple are rinsing for this thing. I can’t imagine how disappointing it must have been to shell out for an M1 Pro in the belief that Apple were about to beef up iPadOS. Then they…didn’t.
I can’t imagine how disappointing it must have been to shell out for an M1 Pro in the belief that Apple were about to beef up iPadOS. Then they…didn’t.
Yep. I paid ~$1200 for it and the Logitech keyboard case, right after it came out in 2021. First brand-new Apple device I bought for myself. And it is definitely the last.
You didn't buy it intending to run VMs on it without checking that it could actually run VMs did you? haha
I get your point though - iPad Pros have absolutely killer hardware that is let down by iPadOS. I would own one of the latest ones if it ran MacOS.
Noooo lmao, I bought it because I had the means and I thought I deserved to buy myself a nice tablet for once, instead of the shitty Samsung A-series or cheap Kindles I'd been attempting to poke and prod at... So when I heard about the M1 going into the iPad, I jumped at it. The "potential" was a bonus.
Now, it's just a glorified youtube machine that occasionally sees OBD-II usage for my cars. Which my Pixel, or a shitty Samsung A-series, or a Kindle can also do.
cue RCR deep voice BUT IT'S GOT A STYLUS AND A KEYBOARD
The library near me has a bunch of 3D printers people can rent time on, or maybe it's based on filament used I'm not sure I've never actually used them.
At one point they had some surface tablets connected up to them so people could review their 3D prints or something, (again not my area of expertise), but apparently it was enough of an issue they eventually got rid of them and just replaced them with some desktops. It seems that the 3D design software just isn't built for touch screen primary interfaces. They'll work up to a point but then you'll come up against something that you have to use a mouse and keyboard for and be stuck, so then you have to go get a mouse and keyboard.
I bet those tablets had their slicer software on them.
A 3D printer is a CNC machine, it doesn't understand 3D model files, you have to give it a series of gantry movement instructions, usually in G-code format. G-code has to be written for the individual printer it's being run on, because some of them consider the bottom left edge of the bed to be the origin, some the bottom right, some the center, you need to know the nozzle size, things like that. So you typically slice your model right before printing. And yeah I'm not really aware of any tablet friendly slicer software.
It sounds like the idea is to bring in your ready to print files and load them up and just use the Surface to review and send it to the printer via the slicer? A surface would be fine for that, especially since they support keyboards and mice.
14 here. Lenovo T-series life.
AMD T14 G1 here, with LMDE. Definitely my most used computer.
Well, you're in luck. The Piccolo N150 netbook is an 8in screen lol
