What steps do you take to secure your server and your selfhosted services?
Inspired by this comment to try to learn what I'm missing.
Another concern I have is does it need to be on a separate machine on a vlan from the rest of the network or is that too much?
I put up a sign that says, "No hackers allowed plz"
How has that been going?
Some I haven't yet found in this thread:
127.0.0.1:8080:8080)One thing I do is instead of having an open SSH port, I have an OpenVPN server that I’ll connect to, then SSH to the host from within the network. Then, if someone hacks into the network, they still won’t have SSH access.
I do the same, but with Wireguard instead of OpenVPN. The performance is much better in my experience and it sucks less battery life.
Fail2ban config can get fairly involved in my experience. I'm probably not doing it the right way, as I wrote a bunch of web server ban rules --- anyone trying to access wpadmin gets banned, for instance (I don't use WordPress, and if I did, it wouldn't be accessible from my public facing reverse proxy).
I just skimmed my nginx logs and looked for anything funky and put that in a ban rule, basically.
Disable password authentication on SSH
Enable firewall and block all ports you're not using(most firewalls do this by default)
Switch to a LTS kernel(not security related, but it keeps things going smooth... Technically it is safer since it gets updated less often so it is a bit more battle tested? Never investigated whenever a LTS kernel is safer than a standard one)
Use Caddy to proxy to services instead of directly exposing them out
HTTPS for web stuff(Caddy does it automatically)
Dropping instead of blocking might technically be better because it wastes a bit more bot time and they see it as "it doesn't exist" rather than an obsticle to try exploits on. Not sure if that is true though.
For me:
For more info, I followed a lot of stuff on: https://github.com/imthenachoman/How-To-Secure-A-Linux-Server
This, but I prefer nginx.
And no real need for tailscale or cloudflare. If you do not like to depend on a third party service, either port forward and ddns or an external vps+wire guard if you have gcnat
Tailscale and being at my house is the only two ways in so I feel those are pretty good for me.
I don't put it on the Internet.
I have automatic updates enabled and once in a while I scan with Nessus. Also I have backups. Stuff dying or me breaking it is a much greater risk than getting hacked.
I agree - I don’t expose anything to the internet other than the WireGuard endpoint.
I’m only hosting services that my immediate family need to access, so I just set up WireGuard on their devices, and only expose the services on the LAN.
I used to expose services to the internet, until one of my #saltstack clients was exploited through a very recent vulnerability I hadn’t yet patched (only a week or so since it was announced). I was fortunate that the exploit failed due to the server running FreeBSD, so the crontab entry to download the next mailicious payload failed because wget wasn’t available on the server.
That’s when I realised - minimise the attack surface - if you’re not hosting services for anyone in the world to access, don’t expose them to everyone in the world to exploit.
I don’t expose anything to the internet other than the WireGuard endpoint.
This is the way
TBF if you want, you can have a bastion server which is solely whitelisted by IP to stream your content from your local server. It's obviously a pivot point for hackers, but it's the level of effort that 99% of hackers would ignore unless they really wanted to target you. And if you're that high value of a target, you probably shouldn't be opening any ports on your network, which brings us back to your original solution.
I, too, don't expose things to the public because I cannot afford the more safe/obfuscated solutions. But I do think there are reasonable measures that can be taken to expose your content to a wider audience if you wanted.
Is Nessus free for personal use?
For up to 16 endpoints or something like that, yes.
Just tailscale really.
My services are only exposed to the tailscale network, so I don't have to worry about otger devices on my LAN.
A good VPN with MFA is all you really need if you are the only user.
in the context of the comment you referenced:
Definitely have the server on its own VLAN. It shouldn't have any access to other devices that are not related to the services and I would also add some sort of security software.
If you have a public service that you expect to have multiple users on you definitely should have some level of monitoring whether it is just the application logs from the forum that you want to host or further have some sort of EDR on the server.
Things I would do if I was hosting a public forum:
And if the user base grows I would also add:
My new strategy is to block EVERY port except WireGuard. This doesn't work for things you want to host publicly ofc, like a website, but for most self host stuff I don't see anything better than that.
My new strategy is to block EVERY port
Wow! All 65535 +/-, in and out? That's one way to skin a cat.
ez pz:
#!/usr/sbin/nft -f
table inet filter {
chain input {
type filter hook input priority raw; policy accept;
iif "lo" accept
ct state established,related accept
iif "enp1s0" udp dport 51820 accept
iif "enp1s0" drop
}
chain forward {
type filter hook forward priority raw; policy accept;
iif "lo" accept
ct state established,related accept
iif "enp1s0" udp dport 51820 accept
iif "enp1s0" drop
}
chain output {
type filter hook output priority raw; policy accept;
}
}
I do this too. Took me a little effort to set things up, but now its so easy.
use a cheap vlan switch to make an actual vlan DMZ with the services' router
use non-root containers everywhere. segment services in different containers
Default block for incoming traffic is always a good starting point.
I'm personally using crowdsec to good results, but still need to add some more to it as I keep seeing failed attacks that should be blocked much quicker.
I expose some stuff through IPv6 only with my Synology NAS (I am CGNATED) and I have always wondered if I still need to use fail2ban in that environment...
My Synology has an auto block feature that from my understanding is essentially fail2ban, what I don't know is if such a feature works for all my exposed services but Synology's.
My Synology has an auto block feature that from my understanding is essentially fail2ban, what I don’t know is if such a feature works for all my exposed services but Synology’s
I'd be surprised if it works for custom services. Fail2ban has to know what's running and haw to have access to its log file to know what is a failed authentication request. The best you can do without log access is to rate limit new tcp connections. But still you should know what's the service behind because 5 new SSH sessions per minute and IP can be reasonable 5 new http1.0 connections likely cannot load a single html page.