Help with selfhosted wireguard routed through gluetun
Help with selfhosted wireguard routed through gluetun
Hi there,
I wish to run a wireguard docker through a glueton docker so that i can access my paid vpn from my own server. This is what i want:
client -> wireguard docker(selfhosted) -> gluetun docker(connected to paid VPN) -> internet
I have posted before with this issue but still cannot get it to work as expected. I am not sure if there is issues with the wireguard docker not being able to route back through from gluetun as it is trying to force traffic through the tunnel.
Any help would be much appreciated.
docker-compose.yml:
services: gluetun_test: image: qmcgaw/gluetun container_name: gluetun_test cap_add: - NET_ADMIN ports: - "5010:5000" - "5011:8000" # Port of the WireGuard VPN server - "36843:36843/udp" environment: - VPN_SERVICE_PROVIDER=custom - VPN_TYPE=wireguard - WIREGUARD_PUBLIC_KEY= - WIREGUARD_PRIVATE_KEY= - VPN_ENDPOINT_IP=ip - VPN_ENDPOINT_PORT=port - WIREGUARD_ADDRESSES="10.2.0.2/32" wireguard: image: linuxserver/wireguard:latest container_name: wireguard cap_add: - NET_ADMIN environment: - PUID=1000 - PGID=1000 volumes: - ./wireguard/config:/config # ports: # Port for WireGuard-UI # - "5010:5000" # Port of the WireGuard VPN server # - "36843:36843/udp" network_mode: service:gluetun_test sysctls: - net.ipv4.conf.all.src_valid_mark=1
wg0.conf
# Address updated at: 2023-07-08 18:51:31.120262753 +0000 UTC # Private Key updated at: 2023-05-09 18:59:02.233090133 +0000 UTC [Interface] Address = 10.252.1.0/24 ListenPort = 36843 PrivateKey = MTU = 1450 PostUp = iptables -A FORWARD -i wg0 -j ACCEPT; iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE PostDown = iptables -D FORWARD -i wg0 -j ACCEPT; iptables -t nat -D POSTROUTING -o eth0 -j MASQUERADE Table = [Peer] PublicKey = PresharedKey = AllowedIPs = 10.252.1.1/24