Skip Navigation

Swapping LCD drive into new OLED

So this is probably a dumb question, but I got a refurbished OLED and plan to pop my 2tb drive from my LCD model into the new OLED.

This should just be plug and play right? I don't see anything about the OLED decks using a different OS or firmware or anything.

EDIT: Thanks for the feedback y'all! I'm going to try it and see what happens. I'll report back if anything funky happens. Not a big deal if I end up needing to reformat the drive.

EDIT2: Replaced the stock OLED drive with the 2tb drive from the LCD this morning, and so far so good - no issues to report.

12 comments
  • Dont know if it will work, but I think it's worth a try. If it doesn't work you can reset it or swap it back

  • I've done this one Linux desktop and had zero issues. It was 100% plug and play. SteamOS is Arch Linux with some modifications. So, I'm pretty sure it'll be fine. If anything, put back the old drive.

  • Replaced the stock OLED drive with the 2tb drive from the LCD this morning, and so far so good - no issues to report.

    Even my modded games (New Vegas, Witcher 3) carried over with no problems.

12 comments