I got some WAGO connectors for christmas
I got some WAGO connectors for christmas
Now I can replace all the twist caps in my house
You're viewing a single thread.
47 comments
-
I can see how these are easier to use, but why would you replace existing twist caps?
-
-
Then something is wrong - like not using the correct size
-
Yeah, agreed. WAGOs are awesome and look factory professional, but wire nuts are still used most of the time - easier to come by and still cheaper (although WAGOs are becoming very affordable).
The trick to wire nuts is simple; use the correct wire size, which can be mixed but follow the spec from the manufacturer’s website, strip all wires to the same recommended exposure length, and the most important part; do not twist your wires together - insert them straight all at the same height and begin twisting the wire nut until there are two to three rotations in your wires below the nut.
-
wire nuts are still used most of the time
Not just digital banking, internet and healthcare that the US is over a decade behind on then? 😂
-
Internet? I mean maybe countrywide, but it’s a big country with ruralness. I download from steam at a 900+ Mbps per second. Is that considered bad? what do you get? I used to only get like 600 until a hardware upgrade so I'm still sure I have bandwidth to spare. its usually takes seconds or minutes to get any game.
-
The prices are definitely bad. Not that I can criticise...
-
-
-
The WAGO install is faster than the damn wire nuts.
-
You don’t have to convince me, just giving wire nut folks a tip
-
-
do not twist your wires together
The packaging usually says you can pre-twist the wires if you like, although maybe that's just the manufacturers yielding to the massive inertia of older tradespeople. This Old House says the same thing. I dunno, I don't pre-twist.
-
-
-
I heard you're supposed to crush them with needle nose pliers so they don't slip out.
-
yeah no dont. these are great
-
-
Marrettes (twist caps) like to break off the ends when you re-connect them. The solid core wire only takes a couple twists before it fatigues and breaks. If you do a new one, or have to strip the wire back because you broke off the last one, I'd definitely change to these. They're much more reliable, don't break the wires and you can see when they're inserted correctly. And when you only have so much length in your wires in the box, you want to preserve what you have so you don't have to open up the wall and lengthen it, and doing so isn't to code anyway if you don't put in a junction box.
I've DIY'ed my own electrical for decades, and I change to these whenever I can now. It's like changing from copper to PEX at any chance for plumbing, superior in every way.
-
47 comments