So I'm cleaning out a house and found a brand new Gateway2k Pentium 4 computer. Someone opened the boxes but never took the computer out, its all still in the plastic and I don't want to ruin the unboxing for someone that is into this. The computer is free to a good home in the Boston metro area to make your retro gaming dreams come true! Shoot me a message, first come, first served.

P4 Computer - Gateway 2000 model 510 - part number 2800434

17" TFT Monitor - Gateway FPD1730

Speakers - Boston Acoustics BA745

Edit: Found a taker, hopefully it goes to it's forever home on Saturday!

Edit edit: its gone!

Started the peppers in March and tomatoes in April. They were getting too big for my grow light so I evicted them outside. Plenty warm in the cold frame in Massachusetts. !

So I had a verbal conversation with a coworker yesterday and now I'm getting fed very specific ads. No possible way it's accidental. I have most of the microphone access to apps limited, I have Google assistant turned off and no VPA setup in my home. I use a Oneplus 9 pro, does anyone have recommendations on how to further root cause this or just par for the course for using any standard android OS? Have other folks had similar experience after locking down their stock phones?

Action Video

For her birthday my daughter received a cuckoo clock. It had very limited programming for 'quiet hours' so I fiddled with it and ended up breaking it. I didn't want to disappoint her so I gutted it and proceeded to install a Pi Zero W and a headphone amplifier I had built. She now has a fully programmable, USB powered, linux based cuckoo clock where I can program it to whatever suites our needs and it syncs it's time with NTP severs. I even connected her night light to it which turns on at night and off to let her know when its time to get out of bed. This combination also allows us to have dance parties with flashing lights, a dancing bird and fun songs coming out of her cuckoo clock. It's ridiculous and eccentric but it makes us happy!

Build

• The Pi Zero's dont come with a sound output so I built an audio output filter to convert the PWM output to an analog audio output
• Connected the analog out to a OPA1642 based headphone amplifier I designed and built
• Wired up the cuckoo bird's coil actuator to a simple MOSFET drive circuit to control it from the Pi's weak GPIO output
• Wired up some 5V string lights (used to be battery powered) to a simple MOSFET driver circuit to control it from the Pi's 3.3V GPIO output
• Wrote some bash code to make the bird dance, the light flash and the cuckoo bird sounds play
• All the scheduling and execution of the code is done clean and simple in crontab
• I also have a text to speech engine verbally state the hour after the cuckoo action so my daughter can better learn to tell time by herself

To re-map the audio to the PWM0 output of the Pi

add to /boot/config.txt to remap the audio to the PWM0 and PWM1 pins of the pi.

```

Enable audio (loads snd_bcm2835)

dtparam=audio=on #remaps the audio to the PWM0 and PWM1 pins (pins 18 and 13) dtoverlay=audremap,pins_18_19 ```

Code

Cron Scheduling

``` @reboot /home/pi/startup.sh

#cuckoo between 8am and 6pm, inclusive 0 8-18 * * * /home/pi/cuckoo.sh

#turn on the night light at 6:15 pm 15 18 * * * echo "1" > /sys/class/gpio/gpio26/value #turn off the night light at 6:15 am 15 6 * * * echo "0" > /sys/class/gpio/gpio26/value ```

Startup Configuration for GPIO

```bash #!/bin/bash

#setup the GPIO #"In order to use a GPIO pin through sysfs, we first have to “export” each one to make the appropriate paths available." echo "17" > /sys/class/gpio/export echo "26" > /sys/class/gpio/export #set direction echo "out" > /sys/class/gpio/gpio17/direction #cuckoo movement echo "out" > /sys/class/gpio/gpio26/direction #nightlight ```

Flashing Light Code

```bash #!/bin/bash

i=1

while [ "$i" -le 3 ]; do #turning the GPIO on echo "1" > /sys/class/gpio/gpio26/value sleep 0.050 echo "0" > /sys/class/gpio/gpio26/value sleep 0.050 i=$((i + 1)) done ```

Cuckoo Code

```bash #!/bin/bash i=1 echo "Looping "$(date +%I)" times"

while [ "$i" -le "$(date +%I)" ]; do aplay /home/pi/cuckoo.wav & #flash the lights three times quickly /home/pi/flash.sh & #turn on the cuckoo bird coil to make it bob down and flaps its wings echo "1" > /sys/class/gpio/gpio17/value sleep 0.300 #turn off the cuckoo bird coil so it sits back down echo "0" > /sys/class/gpio/gpio17/value sleep 0.700 i=$((i + 1)) done #Text to speech engine, speaks the current hour through the speaker #date + sed command below returns the hour, in 12 format, and the sed command removes the leading zeros espeak -v mb-en1 -s 120 "it is $(date +%I | sed 's/^0*//') oh clock" ```

Title says most of it. Spin electric scooters exited the Seattle market and abandoned their scooters all over the city and apparently they have a pi 4 in them!

Does anyone else have a Turbo Button™ on their router? My wifi router is in essentially attic space with no AC so it gets hot and acts up with connectivity issues. My turbo mode solves the problem.

Found some tiny coffee plants while in Hawaii and thought they looked amusingly fake so I grabbed a picture.

I call this nonsense host ‘Ghost’, for me it’s similar to a tape backup solution. Fairly simple concept, it’s an old Pi1 + external mechanical drive that sits dormant with its ethernet off. Once a month, at a random time and random date it enables the ethernet, spins up the drive and pulls data from the main server to update its drive then goes black until next month. The only way to check or maintain the pi is a push button that toggles the ethernet interface. I slapped it together with some scrap wood, spare hardware and screwed it to a 2x4 in a dark corner of my basement. It’s my 5th string backup, the ultimate insurance policy because I’m mental.