I'm considering switching to linux but I'm not a computer savvy person, so I wanted to have the option to switch back to windows if unforeseen complications (I only have 1 pc). Is it just a download on usb and install? And what ways can I get the product key or "cleaner" debloated versions.
I switched to Linux 27 years ago. My wife asks me to help her with her Windows computer every now and then, and I can't really do it for more than a few minutes before my blood pressure is in the risk zone.
Install Linux in a VirtualBox virtual machine to try it out. No change to your existing Windows system is needed.
Better: install it in a virtual machine on a second hard drive: if you like it and you're ready to switch, switch to booting the real Linux hard-drive and turn the Windows hard drive into the virtual machine, to use within Linux when you need it.
If you switch to Linux, this will happen:
It's gonna be tough: it's a different system, you're not used to it. Like everything else, it's hard to change and get used to new things. So realistically expect some learning curve and some pain. It's normal.
If you give it an honest shot but you decide Linux is not for you, you'll switch back to Windows. You'll be back to your old normal, but you'll start to notice how infuriating and spirit-crushing it is a lot more, having been exposed to a non-insane, user-centric OS for a while. And then you'll be that much sadder in Windows and you'll wish you had the best of both OSes - which you can't.
Just be aware than exposure to a non-Windows OS will probably make you hate Windows more and make your life in Windows ever slightly more miserable, even if you don't stick to the non-Windows OS.
The easiest way to preserve an existing Windows installation is to take out the drive it's on and put in a new drive for Linux. That way if you want to go back, you can just swap in the old drive again. Installing M.2 or SATA drives is very easy and 100% doable even if you're not an expert.
Since you're not computer savvy, I really think you should watch some YouTube videos on how to dual boot linux with windows. That way you can keep windows without having to reinstall it if you ever wanna go back.
Ok, so I'm assuming you have never installed Windows before. It's not that complicated (especially nowadays that Windows finally learned how to automatically search for drivers, that used to be the most annoying part). First of all make a note of your current Windows CD Key, you will need it to reinstall and not every computer can retrieve it if you uninstall windows.
After that, you need a windows USB drive, just like the Linux one you'll use to install Linux. You can get it from Microsoft website, but again I advise you to get it while on Windows (Microsoft hides the way to download the iso on Linux).
Finally I strongly recommend you DON'T uninstall windows, instead keep it and install Linus side by side. This is called dual booting, every time you turn on your computer it will ask you where to boot.
Easy in terms of installing windows? No harder than a normal install in any situation. Easy in terms of usability? Can't even imagine ever trying. Have a hard enough time using my windows cloud r at work.
I know it's not what you're asking but switching back is truly horrible, I have to use w11 at work and I hate every second of it.
One drive shoven down your throat, Xbox stuff wants to install something everytime I update, installing stuff from random exes found on websites (I know the store exists but it sucks if your needs are not "I want to install candy crush"), changed something in your path variable? Reboot! Wtf? I really hope microsoft abandons windows in favour of its cloud apps for people who need it and lets Linux distros rule the desktop world
You can keep windows and install Linux next to it.
The best way would be to add a new ssd or m.2 card to your pc and install Linux on that. Make that the main boot device and Linux normally will detect Windows and give you a boot menu where you can chose between Linux and Windows each time you boot.
Alternatively you can resize the windows partition and install Linux onto free space on your main drive. This is more fiddly and things can go wrong with this if you don't know what you're doing.
You can also boot Linux on an external USB drive but this will be slower and may guge you a false impression of Linux. You can also try Linux in a virtual machine like Virtualbox but again this will be slower and will give you a false impression of Linux as a daily driver OS.
I personally run a dual boot system - I have two m.2 nvme drives, one with windows and one with Linux. I barely use the windows partition now but I keep it around for rare work stuff or the rare occasion I have a game I can't get to run in Linux. And I mean rare - booted Windows maybe 3 times in last 6 months.
Just because no one else is mentioning it, there's a free tool in github to activate any copy of Windows, that could be on a new machine, a VM, Windows To Go, etc. You don't need a product key.
Technically it's easy. You just leave your Windows install where it is (assuming you have enough disk space) and it'll be waiting there ready to embrace you again when you decide to give up on freedom and come crawling back. Psychologically it could be a challenge.
Something I only saw mentioned in a somewhat snarky comment in this thread (apologies if I missed it elsewhere) is that Windows has the option to do a full system image backup.
If you have an external hdd or a nas, from the Windows Backup applet in control panel (not settings) you can create a system image that will contain a full backup of your C: drive and, optionally other drives in your system. You can then restore that backup from the recovery options in your windows install media.
For the windows install media, I’d recommend using the windows media creation tool to create a usb installer on a separate usb key from your Linux installer and then setting it aside just in case. Trying to create windows install media from within Linux is, while not impossible, difficult.
Obviously, you should do all of this before committing to installing Linux to disk. Most Linux install media also functions as a live Linux environment from which you can try things out and see if things will work for you.
Υou can download the Windows iso, burn it in a usb stick before you nuke it to install linux, and find free legal serial numbers online (there are various serials for all versions of win10/11, all legal -- it's considered semi-activated with these).
There's no need for a Windows key because your system is already registered with Microsoft. It creates a unique ID from your computer's peripherals.
So just pop in the USB key, boot from the usb key and follow the instructions. To boot from the USB key you might need to go configure the boot order in your BIOS.
If you choose either of those ways, make a backup using the windows backup wizard. No matter how you choose to reinstall windows, having that backup lets you save your files and settings. Always have a backup!
I’m not gonna link them, but you got a lot of posts about using a second drive to install windows so that its update process doesn’t remove your ability to boot into Linux. Many people do that and there’s nothing wrong with it.
I think it’s better to let windows update mess up your bootloader and learn how to fix it (it’s always incredibly easy but the process varies slightly depending on your distribution). There’s no guarantee that windows update won’t mess up bootloaders on drives it isn’t installed on.
If I were you, and I could look into the future of what’s gonna work, speaking from a couple decades of experience, I’d make a windows install media or two, make a backup or two and pick a distribution to try off a live usb first then if I liked it, I’d install it dual boot so I could switch back to windows just by picking it when the computer starts up.
If you're comfortable with swapping out components in your PC, just buy a second SSD. Remove the Windows drive, put Linux on the new drive. If Linux doesn't work out for you, just swap them back.
You could also run a live Linux distribution from a USB stick, or potentially install Linux onto a USB stick or SD.
If you're nervous about the switch consider dual-booting. Then you're not fully committed to the switch & you can have your old Windows system back whenever you want it.
Main steps are:
Run a defrag on your Windows machine to physically consolidate all your Windows data to one area.
Break that partition into two (Linux will go one the new empty side)
Install Linux from a USB as normal, but don't choose to wipe your drive completely. Choose a manual option instead where you specifically indicate your intended Linux partition from above.
Optional: Once installation is complete you can set up another partition to hold files which can be available to both OSs. Boot into Linux & define the remaining unused space in the Linux partition as a new NTFS partition & give it a name which makes it obvious what it is (i.e. "sharedspace"). Then boot into Windows and move the existing data you'd like to share between OSs here (work documents, movies, music, etc.)
If you have a big storage device you can just partition it and have dual boot, or if you need to use windows stuff you can always virtualize it with Virtualbox for example.
Answering you question, you just need to download the windows iso and use MAS(google it) to activate windows/office permanently. But anyway nowadays isn't required to activate windows unless you want to change how your desktop looks.
Unless you want to feel like Cypher from Matrix, there is no turning back. Jokes aside, if your computer is pre-built or a laptop, it probably already has Windows key saved in BIOS. Though you must install the same version of Windows when you got it the first time. However, there is another way. With a program called Magical Jelly Bean KeyFinder, you can extract your installation's keys (yes, not just the Windows key), and you can use those keys to install Windows later. It's better anyway because sometimes they don't give you a key.
You can debloat your PC after the installation with certain tools.
Windows, in the past has been known to sometimes overwrite the Linux boot loader after a windows update, so be careful with that, since windows assumes no other os exists in the universe.
Depending on your windows version, it might not be a bad idea to backup the license key. Recent versions store your computer's information in the cloud, so unless you change a lot of components, it should reinstall without much hassle. But it doesn't hurt to extract the key just in case. Microsoft gonna Microsoft.
There are tools for this. E.g. jellybean key finder (or something like that).
Depending on the distro, it might help to disable secure boot in the uefi bios.
That being said, take it one step at a time. Don't try to recreate everything you were doing in windows right off the bat. Get comfortable with the desktop first. Try different apps for certain tasks. If you have an Nvidia GPU, the experience can vary greatly between different distros.
As others have mentioned, most distros have a "live environment" on the installation cd, which you can test to see if your hardware is recognised straight away.
That being said, don't feel like you're married to a specific distro. Most Linux users will distro hop quite a bit, before they settle on one that just feels right. And even then they might change again after a while, if they get bored.
Just run Linux straight off the installation media in what's usually called something similar to a "live environment" until you're sure it works.
Otherwise, installing Windows is somewhat more difficult than installing an "easy" Linux distro (e.g. Mint) because you'll have to deal with "activation" bullshit and updated/manufacturer-provided drivers. Unless your computer comes with a computer-specific recovery disk or recovery partition (that you didn't delete when installing Linux), in which case it's easier.
If you feel comfortable swapping out the drives on your computer that would be the easiest way. You can buy a cheap ssd to install linux on it. If you really hate it you can just switch back to the windows drive. This also helps you avoid dual booting.
I dual boot my windows and linux so I can switch between them whatever I want. Depending how you install linux, you can open or check window files on linux. But windows can't check linux files. I kept my windows because adobe products doesn't support linux.
recently I have encountered a problem with this, it is indeed not so straightforward to create a bootable windows 10 USB instillation media under linux.
The media created by fedora media writer is not bootable and the media created by ventoy lacks drivers. I was then able to create a media quite easily with the last windows machine in my household. I don't know if it is a temporary bug or fundamental incompatibility.
So I would suggest you to keep a windows installation media at hand in case you need to switch back, or make sure at least one of your friend has a windows machine you can borrow.
Use this tool to debloat your windows: https://github.com/builtbybel/privatezilla , also, I heard that setting your region as English (International) during installation comes with less bloat-ware installed?
You need to buy a separate $25 SSD for Windows. Do not attempt to have both Linux and Windows on same HDD/SSD, Windows will always kill Linux.
A safe method to go about a debloated and privacy friendly (yes it's possible) Windows installation is using AME Project's playbook with their Wizard tool, on top of a fresh ISO you get from Microsoft. For activation, use the tools from https://massgrave.dev website, HWID activation.
After installing Windows, consider using simplewall as your program firewall and to limit Microsoft telemetry heavily.
Avoid installing random crap, and use a solid antivirus like Kaspersky (ignore political nonsense, merit matters) if you pirate TV shows, movies and software.
I cannot tolerate Windows other than how AME Project does it. Their playbook is better than AtlasOS and other playbooks.
If you want to test out Linux, try running a virtual machine instead. There are a few good free software programs to do this. VirtualBox used to be a good option. It's a free and harmless way to dive into Linux.
If you have a flash drive and an external disk you can boot into Rescuezilla (a disk cloning/backup/restore distribution) using the flash drive, save/backup your OS disk as an image in the external disk, and restore it as needed. After restoration, you will have your OS disk as it was at the time you saved it.
When I first wanted to try Linux out I made a small 50gb partition for it. the logic was that this was the size of just one game and it was an entire operating system, so I wasn't losing much. As I continued to use Linux I kept expanding that partition to correspond with the priority I gave the OS.
So I will get some flack from this I am sure but my daily drivers since about 2004 are Linux I have always had a Mac laptop up to a few years ago in that time frame and Windows work laptops.
Honestly Windows 11 has a lot of nice creature features that KDE has had for a while and with WSL I can use a lot of my Linux commands. Can tell you how many times I have used egrep for things along with having native ssh built in. Powershell is a very powerful shell language especially if you want to go down the .Net rabbit hole but that’s not usually needed
Still my main desktop is Debian stable with distrobox for apps I need more modern versions of. But it’s not hard to switch back and forth
Do a dual boot, that's what I did. If after some time you feel like the windows partition is unnecessary, delete it. If after deletion it suddenly seems to become necessary, it is always possible to reinstall windows, there are tutorials online on how to do that.
It has been my experience that it is a bigger pain in the neck to install Windows. Something you can try is practice it in a virtual machine using something like VirtualBox.
you should already have backups which will let you restore the system with everything you need. your post indicates you don't have one. what if some malware or hardware failure fucks it up or so? create a backup strategy that works for you. it will also give you the freedom to do experiments like this. best of luck.