Anduril 2 (Multi-channel) - Momentary Turbo 3H/4H don't work
Anduril 2 (Multi-channel) - Momentary Turbo 3H/4H don't work
Hi Anduril user's !
I noticed that the momentary turbo does not work for 4H from the "ON" state (3H for those who do not have tint ramping).
To fix it, I have to comment out line 423:
if (! arg) { // first frame only, to allow thermal regulation to work
Do you have the same behavior?
Thank you and good day
You're viewing a single thread.
Hi, multi-channel Emisar D2 user here, Model number 0135,
emisar-2ch, using ToyKeeper's latest Anduril 2 version,anduril.2023-08-07.emisar-2ch.hex: At my end, momentary turbo 3H/4H works just fine and as expected, so I do not have the same behavior.4H from ON for momentary turbo works with every channel mode, whether there is tint ramping or not, and 3H from ON for momentary turbo works when there is no tint ramping with the selected channel mode; all exactly as displayed in the diagram.
Hi thank's for your help. I rollback two custom modification ans it's working again :
- reduce #define HOLD_TIMEOUT from24 to 20 & reduce #define RELEASE_TIMEOUT from 18 to 16
- Apply #2027884 & #2027883 correction suggestion from https://bugs.launchpad.net/flashlight-firmware/+bugs?orderby=importance&start=0
I will investigate which of this two changes cut my turbo off
Glad to hear it’s working. @Protiron@lemmy.world if you are still stumped I was going to suggest posting to this thread on budget light forum where Toykeeper is active: https://budgetlightforum.com/t/anduril-2/62656/1604